Man Did I fight a battle. I could only get 900MHz reliable with the board, until I noticed on a page a person with the same problem. He had stated when he set everything with jumper setting on the motherboard, he could get another 50Mhz.
I then decided to try this, he was right. Not willing to give up on the jumper less feature, I proceeded to download the current BIOS upgrade Here for the board.
Awesome, way better and stable. I was able to achieve 948Mhz with my core voltage set to 1.7V in CMOS. It seems stable and I run at 55 degrees under load for my CPU.
My memory is doing really well for cheap memory, its set to 140Mhz and seems stable also.
I did notice that if I set the voltage to 1.75V in CMOS is will not POST though.
Settings
Multiplier 9X
CPU Freq 105MHz
Core voltage 1.7V
Here is a nice surprise, I updated the BIOS to the A7V133 Bios and got a bit more speed. I got tired of all the unstable A7V bios and the A7V133 seems to be a bit more aggressive with memory. It is also very stable. Now that its getting warmer outside, my inside temp is 28 and still under load my CPU only gets to 51 degrees under full load. I am running my core voltage at 2.19 on motherboard monitor and it still stays reasonably cool. The chip is running at 1125 MHz now.
